Medical-Grade Point-of-Care Terminals: Introduction of POC-6
ADAM-3940-AE, 40-pin Flat Cable Wiring Terminal for AMAX-2241/2242/2243
€45,00 Excl. VAT / €55,80 Incl. VAT
Available on backorder
Compare40-pin Flat Cable Wiring Terminal for AMAX-2241/2242/2243.
| Weight | 0.36 kg |
|---|---|
| Dimensions | 200 × 92 × 60 cm |
| Datasheet | https://advanbuy.com/Products/ADAM/ADAM-3000/ADAM-39100_3940_3952.pdf |
Only logged in customers who have purchased this product may leave a review.
Related products
-
ADAM-3968-AE, SCSI-68 wiring terminal,DIN-rail mount
€66,00 Excl. VAT / €81,84 Incl. VATAdd to cartThe ADAM-3900 series consists of universal screw terminal modules designed for field signal wiring in industrial applications. They can be connected to the analog and digital ports of Advantech products such as the PCL series.
-
ADAM-3013-AE, Isolated RTD Input Module
€234,00 Excl. VAT / €290,16 Incl. VATAdd to cartADAM-3013 is a DIN-rail mounted, RTD input signal conditioning module with 1000 VDC 3-way isolation between input, output and power. The switch configurable input and output offers flexible, wide ranging capability for Platinum and Nichel RTDs. The input of the ADAM-3013 RTD input can be configured for any one of up to fourteen defined temperature …
-
PCLD-785B-AE, 24-ch Relay Output Board
€234,00 Excl. VAT / €290,16 Incl. VATAdd to cartThe PCLD-785B carry 16/24 SPDT electromechanical relays with a 20-pin flat cable connector and an additional 50-pin Opto-22 connector (for PCLD-785B only) compatible with the digital outputs of most I/O Cards. The number of output channels available on the PCLD-785B depends on the connector you use. The I/O card?s 50-pin connector accesses all 24 channels, …
-
PCLD-788-AE, Relay Scanner/multiplexer Board (CE)
€267,00 Excl. VAT / €331,08 Incl. VATAdd to cartPCLD-788 multiplexes 16 channels into a single I/O channel of an A/D converter, voltmeter or IEEE-488-based instrument. Up to 16 PCLD-788s can be cascaded for a total of 256fully-isolated differential channels. The PCLD-788 can be controlled by any PC-LabCard™ product via a 16-bit 20-pin digital output port, found on cards such as the PCL-711B,PCL-812PG or …
-
PCLD-8710-AE, Industrial Wiring Terminal Board With CJC Circuit
€103,00 Excl. VAT / €127,72 Incl. VATAdd to cartThe PCLD-789D is a front-end signal conditioning and channel multiplexing daughterboard for use with PC-LabCard analog input ports. It multiplexes 16 differential input channels into a single A/D converter input channel. You can cascade up to ten PCLD-789Ds, allowing a single data acquisition card to access 160 analog input channels. The PCLD-789D has DB-37 and …
PCLD-8710-AE, Industrial Wiring Terminal Board With CJC CircuitRead More
-
ADAM-3952-AE, 50-pin SCSI DIN-rail Wiring Board
€69,00 Excl. VAT / €85,56 Incl. VATAdd to cartThe ADAM-3900 series consists of universal screw terminal modules designed for field signal wiring in industrial applications. They can be connected to the analog and digital ports of Advantech products such as the PCL series.
-
ADAM-3016-AE, Isolated Strain Gauge Input Module
€234,00 Excl. VAT / €290,16 Incl. VATAdd to cartADAM-3016 is a DIN rail-mounted strain gauge input signal conditioning module with 1000 V DC 3-way isolation between input, output and power. The switch con-figurable input and output offers flexible, wide ranging capability for strain gauge. ADAM-3016 is equipped with a power LED to monitor the line power and a DC-to-DC converter status and 3 …
-
ADAM-3951-BE, Wiring Terminal Module with LED Indicators for DIN-rail Mounting
€76,00 Excl. VAT / €94,24 Incl. VATAdd to cartThe ADAM-3951 is a SCSI-II 50-pin wiring terminal module with LED indicators for DIN-rail mounting. This terminal module can be readily connected to the Advantech PC-Lab cards and allow easy yet reliable access to individual pin connections for the PCI-1752/1754/1756 card.
-
ADAM-3937-BE, DB37 DIN-rail Wiring Board
€43,00 Excl. VAT / €53,32 Incl. VATAdd to cartThe ADAM-3900 series consists of universal screw terminal modules designed for field signal wiring in industrial applications. They can be connected to the analog and digital ports of Advantech products such as the PCL series.
-
ADAM-3968/50-AE, 68-Pin SCSI-II to Two 50-pin Box Header for DIN-rail Mounting
€52,00 Excl. VAT / €64,48 Incl. VATAdd to cartThe ADAM-3900 series consists of universal screw terminal modules designed for field signal wiring in industrial applications. They can be connected to the analog and digital ports of Advantech products such as the PCL series.
-
ADAM-3925-AE, DB-25 Wiring Terminal for DIN-rail Mounting
€31,70 Excl. VAT / €39,31 Incl. VATAdd to cartThe ADAM-3900 series consists of universal screw terminal modules designed for field signal wiring in industrial applications. They can be connected to the analog and digital ports of Advantech products such as the PCL series.
-
PCLD-785-AE, 16-ch Relay Output Board
€186,00 Excl. VAT / €230,64 Incl. VATAdd to cartThe PCLD-785 carries 16/24 SPDT electromechanical relays with a 20-pin flat cable connector and an additional 50-pin Opto-22 connector (for PCLD-785B only) compatible with the digital outputs of most I/O Cards. The number of output channels available on the PCLD-785B depends on the connector you use. The I/O card?s 50-pin connector accesses all 24 channels, …
-
ADAM-3011-AE, Isolated Thermocouple Input Module
€234,00 Excl. VAT / €290,16 Incl. VATAdd to cartThe ADAM-3011 is field-configurable, isolation-base, thermocouple input signal conditioner. ADAM-3011 uses microprocessor-controlled high-resolution 16-bit dual-slope, integrating A/D converter to acquire thermocouple signal and cold junction compensation input.
-
PCLD-885-AE, 16-ch Power Relay Output Board
€223,00 Excl. VAT / €276,52 Incl. VATAdd to cartThe PCLD-885 provides 16 SPST power relay channels with a maximum contact rating of 250 VAC @ 5 A or 30 VDC @ 5 A. The PCLD-885 can be driven directly by the digital output from PC-LabCards through its 20-pin box header or its 50-pin Opto-22 compatible connector.
-
ADAM-3962-AE, DB62 Wiring Terminal For DIN-rail Mounting
€44,00 Excl. VAT / €54,56 Incl. VATAdd to cartThe ADAM-3900 series consists of universal screw terminal modules designed for field signal wiring in industrial applications. They can be connected to the analog and digital ports of Advantech products such as the PCL series.
-
ADAM-3909-AE, DB-9 Wiring Terminal for DIN-rail Mounting
€20,20 Excl. VAT / €25,05 Incl. VATAdd to cartThe ADAM-3900 series consists of universal screw terminal modules designed for field signal wiring in industrial applications. They can be connected to the analog and digital ports of Advantech products such as the PCL series.
-
PCLD-780-BE, Screw Terminal Board
€61,00 Excl. VAT / €75,64 Incl. VATAdd to cartPCLD-780 and PCLD-880 universal screw-terminal boards provide convenient and reliable signal wiring for PC-LabCard™ products with 20-pin flat-cable connectors. PCLD-880is also equipped with a DB37 connector to support PC-LabCard™ products with DB37 connectors.PCLD-780 and PCLD-880 let you install passive components on the special PCB layout to construct your own signal-conditioning circuits.You can easily construct a …
-
PCLD-880-AE, Industrial Wiring Terminal Board w/Adapter
€97,00 Excl. VAT / €120,28 Incl. VATAdd to cartPCLD-780 and PCLD-880 universal screw-terminal boards provide convenient and reliable signal wiring for PC-LabCard™ products with 20-pin flat-cable connectors. PCLD-880is also equipped with a DB37 connector to support PC-LabCard™ products with DB37 connectors.PCLD-780 and PCLD-880 let you install passive components on the special PCB layout to construct your own signal-conditioning circuits.You can easily construct a …
PCLD-880-AE, Industrial Wiring Terminal Board w/AdapterRead More
-
ADAM-3014-AE, Isolated DC Input/Output Module
€170,00 Excl. VAT / €210,80 Incl. VATAdd to cartThe ADAM-3014 is one of the most cost-effective, field-configurable, isolation-based signal conditioners available for protecting processed signals from harm-ful effects of ground loop, motor noise, and other electrical interference. The ADAM-3014 features a new optical isolation technique to provide 1000 VDC isolation with low power consumption and extreme accuracy and stability within a wide range …
-
ADAM-3950-AE, 50-pin Flat Cable Wiring Terminal for DIN-rail Mounting
€58,00 Excl. VAT / €71,92 Incl. VATAdd to cartThe ADAM-3900 series consists of universal screw terminal modules designed for field signal wiring in industrial applications. They can be connected to the analog and digital ports of Advantech products such as the PCL series.
-
ADAM-3920-AE, 20-pin Flat Cable Wiring Terminal for DIN-Rail
€27,60 Excl. VAT / €34,22 Incl. VATAdd to cartThe ADAM-3900 series consists of universal screw terminal modules designed for field signal wiring in industrial applications. They can be connected to the analog and digital ports of Advantech products such as the PCL series.
Reviews
There are no reviews yet.