APAX-5001, 1-slot Backplane Module
€50,00 Excl. VAT / €62,00 Incl. VAT
One slot for one APAX-5000 modules
Combines with APAX-5002 backplane to satisfy installation requirements
Supports both DIN-rail and wall mounting
Hot swap mechanism for all APAX I/O modules
30G shock resistance and 2Grms vibration resistance
Available on backorder
APAX-5001 modules are backplane modules, offering communication and power to APAX-5000 I/O modules inserted on it. APAX-5001 always serves as the last backplane when module number is odd.
Weight | 0,07 kg |
---|---|
Dimensions | 2,8 × 15,1 × 3,8 cm |
Only logged in customers who have purchased this product may leave a review.
Datasheet APAX-5001
DownloadRelated products
-
APAX-5013, 8-ch RTD Module
€389,00 Excl. VAT / €482,36 Incl. VATAdd to cartAPAX-5013 8-ch RTD Module, Wire Burn-out Detection, High Density Channel design, total 8 channels.
APAX-5013 modules offer analog input channels for voltage and current signal measurement. Users can configure each channel with different input type and measurement range.
-
APAX-5045-AE, 24-ch Digital Input/Output Module
€105,00 Excl. VAT / €130,20 Incl. VATAdd to cart12 DI channels and 12 DO channels.
±70 VDC over voltage protection for DI channels.
Short circuit and thermal shutdown protection.
Input characteristic curve according to IEC 61131, type 1.
Each digital channel has its own status LED.
Isolation between channels and backplane. -
APAX-5018-AE, 12-ch Thermocouple Input Module
€568,84 Excl. VAT / €705,36 Incl. VATAdd to cartIsolation between channels and backplane,
Supports wire burn-out detection functionality (4 ~ 20 mA and Thermocouple),
Range: ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V, ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA,
Supports configurable input channels with different input type and range,
High density 12-ch analog input solution for reading thermocouple sensor data. -
APAX-5070, Modbus/TCP Communication Coupler
€309,00 Excl. VAT / €383,16 Incl. VATAdd to cartAPAX-5070-BE, Modbus/TCP Communication Coupler.
Support Modbus/TCP protocol which can be connected with Modbus/TCP master.
Dynamic configuration allows users to configure multiple inputs functions in one module.
Two RJ-45 ports with the same IP address for building daisy chains.
Flexible Modbus address mapping either automatically or manually.
Able to connect to APAX digital I/O modules (max. 768 points) or analog I/O modules (max.192 points).
With 16 sets of onboard alarm which can be enabled by utility without any programming.
Reviews
There are no reviews yet.