APAX-5013, 8-ch RTD Module
€389,00 Excl. VAT / €482,36 Incl. VAT
APAX-5013 8-ch RTD Module, Wire Burn-out Detection, High Density Channel design, total 8 channels.
APAX-5013 modules offer analog input channels for voltage and current signal measurement. Users can configure each channel with different input type and measurement range.
DatasheetAvailable on backorder
APAX-5013 8-ch RTD Module, Wire Burn-out Detection, High Density Channel design, total 8 channels.
APAX-5013 modules offer analog input channels for voltage and current signal measurement. Users can configure each channel with different input type and measurement range.
| Weight | 0,17 kg |
|---|---|
| Dimensions | 3 × 13,9 × 10 cm |
Only logged in customers who have purchased this product may leave a review.
Related products
-
APAX-5040-AE, 24-ch Digital Input Module
€107,00 Excl. VAT / €132,68 Incl. VATAdd to cartAPAX-5040-AE, 24-ch Digital Input Module.
Supports both sink and source type input.
Rated voltage input value: 24 VDC.
±70 VDC over voltage protection.
Input characteristic curve according to IEC 61131, type 1.
Each digital channel has its own status LED.
Isolation between channels and backplane. -
APAX-5060-A1E, 24-ch Relay Output Module
€145,00 Excl. VAT / €179,80 Incl. VATAdd to cartAPAX-5060 24-ch Relay Output Module.
Relay type: Form A (SPST).
Contact Rating: 5 A @ 250 VAC, 5 A @ 30 VDC.
Each digital channel has its own status LED.
Isolation between channels and backplane bus. -
APAX-5490-IP4AE, 4 Port RS-232/422/485 Isolation Module
€197,00 Excl. VAT / €244,28 Incl. VATAdd to cart-4 COM ports for APAX controller with PCI express interface.
-COM 1, COM 2 : RS-232/422/485.
-COM 3, COM 4 : RS-232/422/485.
-Baud Rate : 50 bps ~ 230.4 kbps.
-15 kV ESD protection.
-2500 VDC EFT protection.
-2500 VDC isolation protection (between COM ports and backplane). -
APAX-5080-AE, 4/8-ch High Speed Counter Module
€236,00 Excl. VAT / €292,64 Incl. VATAdd to cartSupports multiple operating modes: (1) Up mode (2) Up/Down mode (3) Pulse/Direction mode (4) A/B Phase mode (5) Frequency mode.
4 or 8 counter channels depends on operating modes.
32-bit counter range with 1 bit overflow/underflow.
1 MHz counter frequency.
4 digital input channels with counter gate functionality.
4 digital output channels with counter alarm output functionality.
Over voltage, short circuit and thermal protection design.
2500 VDC isolation protection (between channels and backplane).
Reviews
There are no reviews yet.