APAX-5013, 8-ch RTD Module
€389,00 Excl. VAT / €482,36 Incl. VAT
APAX-5013 8-ch RTD Module, Wire Burn-out Detection, High Density Channel design, total 8 channels.
APAX-5013 modules offer analog input channels for voltage and current signal measurement. Users can configure each channel with different input type and measurement range.
Available on backorder
APAX-5013 Â 8-ch RTD Module, Wire Burn-out Detection, High Density Channel design, total 8 channels.
APAX-5013 modules offer analog input channels for voltage and current signal measurement. Users can configure each channel with different input type and measurement range.
Weight | 0,17 kg |
---|---|
Dimensions | 3 × 13,9 × 10 cm |
Only logged in customers who have purchased this product may leave a review.
Datasheet APAX-5013
DownloadRelated products
-
APAX-5018-AE, 12-ch Thermocouple Input Module
€568,84 Excl. VAT / €705,36 Incl. VATAdd to cartIsolation between channels and backplane,
Supports wire burn-out detection functionality (4 ~ 20 mA and Thermocouple),
Range: ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V, ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA,
Supports configurable input channels with different input type and range,
High density 12-ch analog input solution for reading thermocouple sensor data. -
APAX-5001, 1-slot Backplane Module
€50,00 Excl. VAT / €62,00 Incl. VATAdd to cartOne slot for one APAX-5000 modules
Combines with APAX-5002 backplane to satisfy installation requirements
Supports both DIN-rail and wall mounting
Hot swap mechanism for all APAX I/O modules
30G shock resistance and 2Grms vibration resistance
-
APAX-5060-A1E, 24-ch Relay Output Module
€148,00 Excl. VAT / €183,52 Incl. VATAdd to cartAPAX-5060 24-ch Relay Output Module.
Relay type: Form A (SPST).
Contact Rating: 5 A @ 250 VAC, 5 A @ 30 VDC.
Each digital channel has its own status LED.
Isolation between channels and backplane bus. -
APAX-5040-AE, 24-ch Digital Input Module
€110,00 Excl. VAT / €136,40 Incl. VATAdd to cartAPAX-5040-AE, 24-ch Digital Input Module.
Supports both sink and source type input.
Rated voltage input value: 24 VDC.
±70 VDC over voltage protection.
Input characteristic curve according to IEC 61131, type 1.
Each digital channel has its own status LED.
Isolation between channels and backplane.
Reviews
There are no reviews yet.