APAX-5013, 8-ch RTD Module
€389,00 Excl. VAT / €482,36 Incl. VAT
APAX-5013 8-ch RTD Module, Wire Burn-out Detection, High Density Channel design, total 8 channels.
APAX-5013 modules offer analog input channels for voltage and current signal measurement. Users can configure each channel with different input type and measurement range.
Available on backorder
APAX-5013 Â 8-ch RTD Module, Wire Burn-out Detection, High Density Channel design, total 8 channels.
APAX-5013 modules offer analog input channels for voltage and current signal measurement. Users can configure each channel with different input type and measurement range.
Weight | 0,17 kg |
---|---|
Dimensions | 3 × 13,9 × 10 cm |
Only logged in customers who have purchased this product may leave a review.
Datasheet APAX-5013
DownloadRelated products
-
APAX-5071-AE, PROFINET Communication Coupler
€357,00 Excl. VAT / €442,68 Incl. VATAdd to cart2 x RJ-45 (2-channel switch, share same IP address) Connector.
APAX-5071-AE is a PROFINET Communication Coupler. -
APAX-5018-AE, 12-ch Thermocouple Input Module
€568,84 Excl. VAT / €705,36 Incl. VATAdd to cartIsolation between channels and backplane,
Supports wire burn-out detection functionality (4 ~ 20 mA and Thermocouple),
Range: ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V, ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA,
Supports configurable input channels with different input type and range,
High density 12-ch analog input solution for reading thermocouple sensor data. -
APAX-5002, 2-slot Backplane Module
€93,00 Excl. VAT / €115,32 Incl. VATAdd to cart– Two slots for two APAX-5000 modules
– With built-in expansion ports, two APAX-5002 backplanes can be connected to form a remote expansion
– Supports both DIN-rail and wall mounting
– Hot swap mechanism for all APAX I/O modules
– 30G shock resistance and 2Grms vibration resistance
-
APAX-5046-AE, 24-ch Digital Output Module
€120,89 Excl. VAT / €149,90 Incl. VATAdd to cartVoltage Range: 8 ~ 35 VDC.
Short circuit protection.
Thermal shutdown protection.
Each digital channel has its own status LED.
Isolation between channels and backplane.
Reviews
There are no reviews yet.