APAX-5018-AE, 12-ch Thermocouple Input Module
€568,84 Excl. VAT / €705,36 Incl. VAT
Isolation between channels and backplane,
Supports wire burn-out detection functionality (4 ~ 20 mA and Thermocouple),
Range: ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V, ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA,
Supports configurable input channels with different input type and range,
High density 12-ch analog input solution for reading thermocouple sensor data.
Available on backorder
APAX-5018-AE 12-ch Thermocouple Input Module.
Isolation between channels and backplane,
Supports wire burn-out detection functionality (4 ~ 20 mA and Thermocouple),
Range: ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V, ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA,
Supports configurable input channels with different input type and range,
High density 12-ch analog input solution for reading thermocouple sensor data.
Weight | 0,17 kg |
---|---|
Dimensions | 3 × 13,9 × 10 cm |
Only logged in customers who have purchased this product may leave a review.
Datasheet APAX-5018
DownloadRelated products
-
APAX-5071-AE, PROFINET Communication Coupler
€357,00 Excl. VAT / €442,68 Incl. VATAdd to cart2 x RJ-45 (2-channel switch, share same IP address) Connector.
APAX-5071-AE is a PROFINET Communication Coupler. -
APAX-5040-AE, 24-ch Digital Input Module
€110,00 Excl. VAT / €136,40 Incl. VATAdd to cartAPAX-5040-AE, 24-ch Digital Input Module.
Supports both sink and source type input.
Rated voltage input value: 24 VDC.
±70 VDC over voltage protection.
Input characteristic curve according to IEC 61131, type 1.
Each digital channel has its own status LED.
Isolation between channels and backplane. -
APAX-5490-IP4AE, 4 Port RS-232/422/485 Isolation Module
€197,00 Excl. VAT / €244,28 Incl. VATAdd to cart-4 COM ports for APAX controller with PCI express interface.
-COM 1, COM 2 : RS-232/422/485.
-COM 3, COM 4 : RS-232/422/485.
-Baud Rate : 50 bps ~ 230.4 kbps.
-15 kV ESD protection.
-2500 VDC EFT protection.
-2500 VDC isolation protection (between COM ports and backplane). -
APAX-5002, 2-slot Backplane Module
€93,00 Excl. VAT / €115,32 Incl. VATAdd to cart– Two slots for two APAX-5000 modules
– With built-in expansion ports, two APAX-5002 backplanes can be connected to form a remote expansion
– Supports both DIN-rail and wall mounting
– Hot swap mechanism for all APAX I/O modules
– 30G shock resistance and 2Grms vibration resistance
Reviews
There are no reviews yet.