APAX-5070, Modbus/TCP Communication Coupler
€309,00 Excl. VAT / €383,16 Incl. VAT
APAX-5070-BE, Modbus/TCP Communication Coupler.
Support Modbus/TCP protocol which can be connected with Modbus/TCP master.
Dynamic configuration allows users to configure multiple inputs functions in one module.
Two RJ-45 ports with the same IP address for building daisy chains.
Flexible Modbus address mapping either automatically or manually.
Able to connect to APAX digital I/O modules (max. 768 points) or analog I/O modules (max.192 points).
With 16 sets of onboard alarm which can be enabled by utility without any programming.
Available on backorder
The APAX-5070-BE Modbus/TCP Communication Coupler is a high-density Modbus/TPC remote I/O solution. It allows any PC, controller, or HMI device that supports Modbus/TCP protocol to easily and cost-effectively add remote I/O functionality to access data. It also performs read and write actions. By leveraging the Advantech APAX product line features such as, high density I/O, flexibility, scalability, and hot swap functionality. Users can build remote I/O systems to fulfill PLC or control application needs.
Weight | 0,19 kg |
---|---|
Dimensions | 236 × 160 × 55 cm |
Datasheet | https://advanbuy.com/Products/APAX/APAX-5070_DS20140422112632.pdf |
Only logged in customers who have purchased this product may leave a review.
Datasheet APAX-5070
DownloadRelated products
-
APAX-5002, 2-slot Backplane Module
€93,00 Excl. VAT / €115,32 Incl. VATAdd to cart– Two slots for two APAX-5000 modules
– With built-in expansion ports, two APAX-5002 backplanes can be connected to form a remote expansion
– Supports both DIN-rail and wall mounting
– Hot swap mechanism for all APAX I/O modules
– 30G shock resistance and 2Grms vibration resistance
-
APAX-5013, 8-ch RTD Module
€389,00 Excl. VAT / €482,36 Incl. VATAdd to cartAPAX-5013 8-ch RTD Module, Wire Burn-out Detection, High Density Channel design, total 8 channels.
APAX-5013 modules offer analog input channels for voltage and current signal measurement. Users can configure each channel with different input type and measurement range.
-
APAX-5001, 1-slot Backplane Module
€50,00 Excl. VAT / €62,00 Incl. VATAdd to cartOne slot for one APAX-5000 modules
Combines with APAX-5002 backplane to satisfy installation requirements
Supports both DIN-rail and wall mounting
Hot swap mechanism for all APAX I/O modules
30G shock resistance and 2Grms vibration resistance
-
APAX-5490-IP4AE, 4 Port RS-232/422/485 Isolation Module
€197,00 Excl. VAT / €244,28 Incl. VATAdd to cart-4 COM ports for APAX controller with PCI express interface.
-COM 1, COM 2 : RS-232/422/485.
-COM 3, COM 4 : RS-232/422/485.
-Baud Rate : 50 bps ~ 230.4 kbps.
-15 kV ESD protection.
-2500 VDC EFT protection.
-2500 VDC isolation protection (between COM ports and backplane).
Reviews
There are no reviews yet.