APAX-5071-AE, PROFINET Communication Coupler
€357,00 Excl. VAT / €442,68 Incl. VAT
2 x RJ-45 (2-channel switch, share same IP address) Connector.
APAX-5071-AE is a PROFINET Communication Coupler.
Available on backorder
It has 2 x RJ-45 (2-channel switch, share same IP address) Connector.
APAX-5071-AE is a PROFINET Communication Coupler.
Weight | 0,19 kg |
---|---|
Dimensions | 236 × 160 × 55 cm |
Datasheet | https://advanbuy.com/Products/APAX/APAX-5070_DS20140422112632.pdf |
Only logged in customers who have purchased this product may leave a review.
Datasheet APAX-5071
DownloadRelated products
-
APAX-5001, 1-slot Backplane Module
€50,00 Excl. VAT / €62,00 Incl. VATAdd to cartOne slot for one APAX-5000 modules
Combines with APAX-5002 backplane to satisfy installation requirements
Supports both DIN-rail and wall mounting
Hot swap mechanism for all APAX I/O modules
30G shock resistance and 2Grms vibration resistance
-
APAX-5080-AE, 4/8-ch High Speed Counter Module
€242,00 Excl. VAT / €300,08 Incl. VATAdd to cartSupports multiple operating modes: (1) Up mode (2) Up/Down mode (3) Pulse/Direction mode (4) A/B Phase mode (5) Frequency mode.
4 or 8 counter channels depends on operating modes.
32-bit counter range with 1 bit overflow/underflow.
1 MHz counter frequency.
4 digital input channels with counter gate functionality.
4 digital output channels with counter alarm output functionality.
Over voltage, short circuit and thermal protection design.
2500 VDC isolation protection (between channels and backplane). -
APAX-5040-AE, 24-ch Digital Input Module
€110,00 Excl. VAT / €136,40 Incl. VATAdd to cartAPAX-5040-AE, 24-ch Digital Input Module.
Supports both sink and source type input.
Rated voltage input value: 24 VDC.
±70 VDC over voltage protection.
Input characteristic curve according to IEC 61131, type 1.
Each digital channel has its own status LED.
Isolation between channels and backplane. -
APAX-5013, 8-ch RTD Module
€389,00 Excl. VAT / €482,36 Incl. VATAdd to cartAPAX-5013 8-ch RTD Module, Wire Burn-out Detection, High Density Channel design, total 8 channels.
APAX-5013 modules offer analog input channels for voltage and current signal measurement. Users can configure each channel with different input type and measurement range.
Reviews
There are no reviews yet.