-7ch digital input/8ch digital output.
-Protocols: Modbus RTU,ASCII.
-Watchdog timer to recover the system.
The ADAM-4050 features seven digital input channels and eight digital output channels. The outputs are open-collector transistor switches that you can control from the host computer. You can also use the switches to control solid-state relays, which in turn can control heaters, pumps and power equipment. The host computer can use the module’s digital inputs to determine the state of limit or safety switches or remote digital signals.
Datasheet: Download
| Weight | 0,22 kg |
|---|---|
| Dimensions | 150 × 85 × 51 cm |
| Manufacturer | Advantech |
Related products
-
ADAM-5013, 3-ch RTD Input Module
€271,00 Excl. VAT / €336,04 Incl. VATAdd to cart-Accuracy: ±0.1% or better.
-Effective resolution: 16-bit.
-Input connections: 2, 3 or 4 wire.
-Sampling rate: 10 samples/sec. (total).
-Isolation voltage: 3000 VDC.
-Input type: PT100 or Ni RTD.
-Channels: 3. -
ADAM-5056S, 16-ch Sink Type Isolated Digital Output Module w/LED
€133,00 Excl. VAT / €164,92 Incl. VATAdd to cart-Over Voltage Protection: 70 Vdc.
-Optical Isolation: 2500 Vdc.
-Power Consumption: 0.6 W (typical).
-Power Dissipation: 300 mW.
-16-channel.
-
ADAM-5018P, 7-ch Thermocouple Input Module with Independent Input Range
€348,00 Excl. VAT / €431,52 Incl. VATAdd to cart-Accuracy Bandwidth: ±0.1% or better, 13.1 Hz @ 50 Hz, 15.72 Hz @ 60 Hz.
-Sampling Rate: 10 samples/sec. (total).
-High Common Mode: 2000 VDC.
-Isolation Voltage: 3,000 VDC.
-Fault and Overvoltage Protection: Withstands over voltage up to ±35 V.
-CMR @ 50/60 Hz: 92 dB min.
-Input Impedance: 20 MΩ. (Build-in 120 Ω Register for Current Input).
-Built-in TVS/ESD Protection.
-Filter function: Yes.
-Channels: 7 differential with Independent Input Range.
-
ADAM-5069, 8-ch Power Relay Output Module w/LED
€125,00 Excl. VAT / €155,00 Incl. VATAdd to cart-High Power Relay Output : 250Vac@5A, 30Vdc@5A.
-8-channel Relay Output.
-8 form A channels.
-8 LED indicators.
-Jumper setting for output status when reset.
Datasheet
