ADAM-5051 16-ch Digital Input Module provides sixteen digital input channels. The ADAM-5000 system can use the module?s digital inputs to determine the state of limit or safety switches or to receive remote digital signals.
-Input voltage: 30 Vmax.
-Circuit type: Pull-Up current: 0.5 mA (Source Type).
-Power consumption: 0.53 W.
-Channels: 16.
| Weight | 0.12 kg |
|---|---|
| Dimensions | 150 × 73 × 50 cm |
| Datasheet | https://advanbuy.com/Products/ADAM/ADAM-5000/ADAM-5024_DS.pdf |
Only logged in customers who have purchased this product may leave a review.
Related products
ADAM-5081-AE, 4-ch High Speed Counter/Frequency Module
€313,00 Excl. VAT / €388,12 Incl. VATAdd to basket-Minimum Pulse Width: 1μ sec. (Frequency/Counter Mode).
-Function Mode: Counter (Up/Down, Bi-direction, Up, A/B Phase) Frequency.
-Input Frequency: Frequency Mode: 5Hz ~1MHz Counter Mode: 1MHz max.
-Isolated Voltage: 2500 Vdc.
-Programmable Digital Noise Filter: 1~65000μ sec.
-4 channels for Counter, 8 channels for Frequency.
-Counter Aux. Function: Initial preset, hi-low alarm setting, alarm digital output mapping, overflag.
ADAM-5056D-AE, 16-ch Digital Output Module w/LED
€97,00 Excl. VAT / €120,28 Incl. VATAdd to basket-Operating voltage: 30 Vmax.
-Digital output: Open collector to 30 V, 100 mA max. load.
-Output status hold function.
-Power consumption: 0.5 W (typical); 0.84 W (max.).
-Power dissipation:300 mW for each channel.
-LED indicator: On: Output logic level “1”.
-Channels: 16.
ADAM-5060-AE, 6-ch Relay Output Module
€108,00 Excl. VAT / €133,92 Incl. VATAdd to basket-Contact rating: AC: 125 V @ 0.6 A; 250 V @ 0.3 A
-Insulation resistance: 1000 MW minimum at 500 VDC
-Channels:2 x form A , 4 x form C
-Breakdown voltage: 500 VAC (50/60 Hz)
-Total switching time: 10 msec.
-Relay off time (typical): 1 msec.
-Relay on time (typical): 3 msec.
ADAM-4050-E, 15-Ch DI/O Module w/ Modbus
€93,00 Excl. VAT / €115,32 Incl. VATAdd to basket-7ch digital input/8ch digital output. -Protocols: Modbus RTU,ASCII. -Watchdog timer to recover the system. The ADAM-4050 features seven digital input channels and eight digital output channels. The outputs are open-collector transistor switches that you can control from the host computer. You can also use the switches to control solid-state relays, which in turn can control …
ADAM-5017-A4E, 8-channel Analog Input Module
€213,00 Excl. VAT / €264,12 Incl. VATAdd to basket-Accuracy: ±0.1% or better.
-Effective resolution: 16-bit.
-Input range: ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V; ±20 mA.
-Sampling rate: 10 samples/sec. (total).
-Isolation voltage: 3000 VDC.
-Fault and overvoltage protection: withstands overvoltage up to ±35 V.
-lnput type: mV, V, mA.
-Channels: 8 differential.
ADAM-5017P-AE, 8-ch Analog Input Module with Independent Input Range
€269,00 Excl. VAT / €333,56 Incl. VATAdd to basket-Accuracy: Voltage mode : ±0.1% or better, Current mode : ±0.2% or better.
-High Common Mode: 200 VDC.
-Over Voltage Protection: ±60 VDC.
-Built-in TVS/ESD Protection.
-Isolation Voltage: 3,000 VDC.
-CMR @ 50/60 Hz: 92 dB min.
-Channels: 8 differential and independent configuration channels.
-Input Impedance: Voltage: 800kΩ, Current: 120Ω (Build-in 120Ω. register for Current Input).
-lnput Type: mV, V (supports uni-polar and bipolar), mA.
-Sampling Rate: 10 samples/sec.
ADAM-5024-A2E, 4-ch Analog Output Module
€302,00 Excl. VAT / €374,48 Incl. VATAdd to basket-Accuracy: ±0.1% of FSR for current output.
-Effective resolution: 12-bit.
-Isolation voltage: 3000 VDC.
-Output range: 0 ~ 20 mA, 4 ~ 20 mA, 0 ~10 V.
-Resolution: ±0.015% of FSR.
-Channels: 4.
-Output type: mA, V.
ADAM-5018P-AE, 7-ch Thermocouple Input Module with Independent Input Range
€321,00 Excl. VAT / €398,04 Incl. VATAdd to basket-Accuracy Bandwidth: ±0.1% or better, 13.1 Hz @ 50 Hz, 15.72 Hz @ 60 Hz.
-Sampling Rate: 10 samples/sec. (total).
-High Common Mode: 2000 VDC.
-Isolation Voltage: 3,000 VDC.
-Fault and Overvoltage Protection: Withstands over voltage up to ±35 V.
-CMR @ 50/60 Hz: 92 dB min.
-Input Impedance: 20 MΩ. (Build-in 120 Ω Register for Current Input).
-Built-in TVS/ESD Protection.
-Filter function: Yes.
-Channels: 7 differential with Independent Input Range.
ADAM-5018-A2E, 7-ch Thermocouple Input Module
€239,00 Excl. VAT / €296,36 Incl. VATAdd to basket-Accuracy Bandwidth: ±0.1% or better, 13.1 Hz @ 50 Hz, 15.72 Hz @ 60 Hz.
-Sampling Rate: 10 samples/sec. (total).
-High Common Mode: 2000 VDC.
-Isolation Voltage: 3,000 VDC.
-Fault and Overvoltage Protection: Withstands over voltage up to ±35 V.
-CMR @ 50/60 Hz: 92 dB min.
-Input Impedance: 20 MΩ. (Build-in 120 Ω Register for Current Input).
-Built-in TVS/ESD Protection.
-Filter function: Yes.
ADAM-5017H-BE, 8-channel High-speed Analog Input Module
€291,00 Excl. VAT / €360,84 Incl. VATAdd to basket-Accuracy: ±0.1% or better.
-Effective resolution: 12-bit plus sign bit.
-1000 Hz bandwidth.
-High sampling rate:ADAM-5000/485&5000E: 100 samples/sec, ADAM-5510 & ADAM-5511: 8000 samples/sec max.
-3000VDC Isolation voltage protection.
-Distinct range settings allowed on each channel.
-Input type: mV, V, mA.
ADAM-5017UH-A1E, 8-ch Ultra High Speed Analog Input Module
€339,00 Excl. VAT / €420,36 Incl. VATAdd to basket-Accuracy: ±0.1% or better.
-Effective resolution: 12-bit.
-Input range: ±10 V, +0 ~ +10 V, +0 ~ +20 mA, +4 ~ +20 mA.
-Isolation voltage: 3000 VDC.
-Sampling rate: 50K sample per sec (8 Channels).
-Fault and overvoltage protection: withstands overvoltage up to ±35 V.
-lnput type: mV, V, mA.
-Channels: 8 differential.
ADAM-5050-A2E, 16-ch Universal Digital I/O Module
€104,00 Excl. VAT / €128,96 Incl. VATAdd to basket-Digital input: Support Dry/Wet Contact.
-Digital output: Open Collector to 30 V, 450 mW max. load.
-I/O Type: bit-wise selectable by DIP switch.
-Power consumption: 0.35 W (typical); 1.2 W (max).
-Channels: 16.
Reviews
There are no reviews yet.