APAX-5013, 8-ch RTD Module
€389,00 Excl. VAT / €482,36 Incl. VAT
APAX-5013 8-ch RTD Module, Wire Burn-out Detection, High Density Channel design, total 8 channels.
APAX-5013 modules offer analog input channels for voltage and current signal measurement. Users can configure each channel with different input type and measurement range.
DatasheetAvailable on backorder
APAX-5013 8-ch RTD Module, Wire Burn-out Detection, High Density Channel design, total 8 channels.
APAX-5013 modules offer analog input channels for voltage and current signal measurement. Users can configure each channel with different input type and measurement range.
| Weight | 0,17 kg |
|---|---|
| Dimensions | 3 × 13,9 × 10 cm |
Only logged in customers who have purchased this product may leave a review.
Related products
-
APAX-5018-AE, 12-ch Thermocouple Input Module
€555,00 Excl. VAT / €688,20 Incl. VATAdd to cartIsolation between channels and backplane,
Supports wire burn-out detection functionality (4 ~ 20 mA and Thermocouple),
Range: ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V, ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA,
Supports configurable input channels with different input type and range,
High density 12-ch analog input solution for reading thermocouple sensor data. -
APAX-5046-AE, 24-ch Digital Output Module
€118,00 Excl. VAT / €146,32 Incl. VATAdd to cartVoltage Range: 8 ~ 35 VDC.
Short circuit protection.
Thermal shutdown protection.
Each digital channel has its own status LED.
Isolation between channels and backplane. -
APAX-5070, Modbus/TCP Communication Coupler
€309,00 Excl. VAT / €383,16 Incl. VATAdd to cartAPAX-5070-BE, Modbus/TCP Communication Coupler.
Support Modbus/TCP protocol which can be connected with Modbus/TCP master.
Dynamic configuration allows users to configure multiple inputs functions in one module.
Two RJ-45 ports with the same IP address for building daisy chains.
Flexible Modbus address mapping either automatically or manually.
Able to connect to APAX digital I/O modules (max. 768 points) or analog I/O modules (max.192 points).
With 16 sets of onboard alarm which can be enabled by utility without any programming.
Reviews
There are no reviews yet.