APAX-5018-AE, 12-ch Thermocouple Input Module
€591,00 Excl. VAT / €732,84 Incl. VAT
Isolation between channels and backplane,
Supports wire burn-out detection functionality (4 ~ 20 mA and Thermocouple),
Range: ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V, ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA,
Supports configurable input channels with different input type and range,
High density 12-ch analog input solution for reading thermocouple sensor data.
Non-Stocked, Available Up on Request
APAX-5018-AE 12-ch Thermocouple Input Module.
Isolation between channels and backplane,
Supports wire burn-out detection functionality (4 ~ 20 mA and Thermocouple),
Range: ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V, ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA,
Supports configurable input channels with different input type and range,
High density 12-ch analog input solution for reading thermocouple sensor data.
Weight | 0,17 kg |
---|---|
Dimensions | 236 × 160 × 55 cm |
Datasheet | https://advanbuy.com/Products/APAX/APAX-5013_DS20101126111745.pdf |
Only logged in customers who have purchased this product may leave a review.
Datasheet APAX-5018
DownloadRelated products
-
APAX-5071-AE, PROFINET Communication Coupler
€357,00 Excl. VAT / €442,68 Incl. VATAdd to basket2 x RJ-45 (2-channel switch, share same IP address) Connector.
APAX-5071-AE is a PROFINET Communication Coupler. -
APAX-5070, Modbus/TCP Communication Coupler
€309,00 Excl. VAT / €383,16 Incl. VATAdd to basketAPAX-5070-BE, Modbus/TCP Communication Coupler.
Support Modbus/TCP protocol which can be connected with Modbus/TCP master.
Dynamic configuration allows users to configure multiple inputs functions in one module.
Two RJ-45 ports with the same IP address for building daisy chains.
Flexible Modbus address mapping either automatically or manually.
Able to connect to APAX digital I/O modules (max. 768 points) or analog I/O modules (max.192 points).
With 16 sets of onboard alarm which can be enabled by utility without any programming.
-
APAX-5001-A1E, 1-slot Backplane Module
€50,00 Excl. VAT / €62,00 Incl. VATAdd to basketOne slot for one APAX-5000 modules
Combines with APAX-5002 backplane to satisfy installation requirements
Supports both DIN-rail and wall mounting
Hot swap mechanism for all APAX I/O modules
30G shock resistance and 2Grms vibration resistance
-
APAX-5028-AE, 8-ch Analog Output Module
€427,00 Excl. VAT / €529,48 Incl. VATAdd to basketAPAX-5028-AE, 8-ch Analog Output Module.
8-ch voltage and current output,
Range: ±2.5 V, ±5 V, ±10 V, 0~2.5 V, 0~5 V, 0~10 V, 0~20 mA, 4~20 mA,
Resolution: 14-bit,
Short Circuit Protection,
Isolation between channels and backplane.
Reviews
There are no reviews yet.