APAX-5002, 2-slot Backplane Module
€82,42 Excl. VAT / €102,20 Incl. VAT
– Two slots for two APAX-5000 modules
– With built-in expansion ports, two APAX-5002 backplanes can be connected to form a remote expansion
– Supports both DIN-rail and wall mounting
– Hot swap mechanism for all APAX I/O modules
– 30G shock resistance and 2Grms vibration resistance
Available on backorder
APAX-5002-BE 2-slot Backplane Module.
Two slots for two APAX-5000 modules.
With built-in expansion ports, two APAX-5002 backplanes can be connected to form a remote expansion.
Supports both DIN-rail and wall mounting.
Hot swap mechanism for all APAX I/O modules.
30G shock resistance and 2Grms vibration resistance.
| Weight | 0,12 kg |
|---|---|
| Dimensions | 5,4 × 15,1 × 3,8 cm |
| Manufacturer | Advantech |
Only logged in customers who have purchased this product may leave a review.
Related products
-
APAX-5060-A1E, 24-ch Relay Output Module
€144,66 Excl. VAT / €179,38 Incl. VATAdd to cartAPAX-5060 24-ch Relay Output Module.
Relay type: Form A (SPST).
Contact Rating: 5 A @ 250 VAC, 5 A @ 30 VDC.
Each digital channel has its own status LED.
Isolation between channels and backplane bus. -
APAX-5080-AE, 4/8-ch High Speed Counter Module
€235,74 Excl. VAT / €292,32 Incl. VATAdd to cartSupports multiple operating modes: (1) Up mode (2) Up/Down mode (3) Pulse/Direction mode (4) A/B Phase mode (5) Frequency mode.
4 or 8 counter channels depends on operating modes.
32-bit counter range with 1 bit overflow/underflow.
1 MHz counter frequency.
4 digital input channels with counter gate functionality.
4 digital output channels with counter alarm output functionality.
Over voltage, short circuit and thermal protection design.
2500 VDC isolation protection (between channels and backplane). -
APAX-5040-AE, 24-ch Digital Input Module
€107,15 Excl. VAT / €132,87 Incl. VATAdd to cartAPAX-5040-AE, 24-ch Digital Input Module.
Supports both sink and source type input.
Rated voltage input value: 24 VDC.
±70 VDC over voltage protection.
Input characteristic curve according to IEC 61131, type 1.
Each digital channel has its own status LED.
Isolation between channels and backplane. -
APAX-5070, Modbus/TCP Communication Coupler
€309,79 Excl. VAT / €384,14 Incl. VATAdd to cartAPAX-5070-BE, Modbus/TCP Communication Coupler.
Support Modbus/TCP protocol which can be connected with Modbus/TCP master.
Dynamic configuration allows users to configure multiple inputs functions in one module.
Two RJ-45 ports with the same IP address for building daisy chains.
Flexible Modbus address mapping either automatically or manually.
Able to connect to APAX digital I/O modules (max. 768 points) or analog I/O modules (max.192 points).
With 16 sets of onboard alarm which can be enabled by utility without any programming.
Reviews
There are no reviews yet.