Medical-Grade Point-of-Care Terminals: Introduction of POC-6
APAX-5028-AE, 8-ch Analog Output Module
€403,00 Excl. VAT / €499,72 Incl. VAT
APAX-5028-AE, 8-ch Analog Output Module.
8-ch voltage and current output,
Range: ±2.5 V, ±5 V, ±10 V, 0~2.5 V, 0~5 V, 0~10 V, 0~20 mA, 4~20 mA,
Resolution: 14-bit,
Short Circuit Protection,
Isolation between channels and backplane.
Available on backorder
APAX-5028-AE, 8-ch Analog Output Module.
8-ch voltage and current output,
Range: ±2.5 V, ±5 V, ±10 V, 0~2.5 V, 0~5 V, 0~10 V, 0~20 mA, 4~20 mA,
Resolution: 14-bit,
Short Circuit Protection,
Isolation between channels and backplane.
| Weight | 0.175 kg |
|---|---|
| Dimensions | 236 × 160 × 55 cm |
| Datasheet | https://advanbuy.com/Products/APAX/APAX-5017H_DS20140422113931.pdf |
Only logged in customers who have purchased this product may leave a review.
Related products
APAX-5490-IP4AE, 4 Port RS-232/422/485 Isolation Module
€185,00 Excl. VAT / €229,40 Incl. VAT-4 COM ports for APAX controller with PCI express interface. -COM 1, COM 2 : RS-232/422/485. -COM 3, COM 4 : RS-232/422/485. -Baud Rate : 50 bps ~ 230.4 kbps. -15 kV ESD protection. -2500 VDC EFT protection. -2500 VDC isolation protection (between COM ports and backplane).-4 COM ports for APAX controller with PCI express interface.
-COM 1, COM 2 : RS-232/422/485.
-COM 3, COM 4 : RS-232/422/485.
-Baud Rate : 50 bps ~ 230.4 kbps.
-15 kV ESD protection.
-2500 VDC EFT protection.
-2500 VDC isolation protection (between COM ports and backplane).
Add to cart
APAX-5071-AE, PROFINET Communication Coupler
€357,00 Excl. VAT / €442,68 Incl. VAT2 x RJ-45 (2-channel switch, share same IP address) Connector. APAX-5071-AE is a PROFINET Communication Coupler.2 x RJ-45 (2-channel switch, share same IP address) Connector.
APAX-5071-AE is a PROFINET Communication Coupler.
Add to cart
APAX-5080-AE, 4/8-ch High Speed Counter Module
€239,00 Excl. VAT / €296,36 Incl. VATSupports multiple operating modes: (1) Up mode (2) Up/Down mode (3) Pulse/Direction mode (4) A/B Phase mode (5) Frequency mode. 4 or 8 counter channels depends on operating modes. 32-bit counter range with 1 bit overflow/underflow. 1 MHz counter frequency. 4 digital input channels with counter gate functionality. 4 digital output channels with counter alarm output functionality. Over voltage, short circuit and thermal protection design. 2500 VDC isolation protection (between channels and backplane).Supports multiple operating modes: (1) Up mode (2) Up/Down mode (3) Pulse/Direction mode (4) A/B Phase mode (5) Frequency mode.
4 or 8 counter channels depends on operating modes.
32-bit counter range with 1 bit overflow/underflow.
1 MHz counter frequency.
4 digital input channels with counter gate functionality.
4 digital output channels with counter alarm output functionality.
Over voltage, short circuit and thermal protection design.
2500 VDC isolation protection (between channels and backplane).
Add to cart
APAX-5060-A1E, 24-ch Relay Output Module
€138,00 Excl. VAT / €171,12 Incl. VATAPAX-5060 24-ch Relay Output Module. Relay type: Form A (SPST). Contact Rating: 5 A @ 250 VAC, 5 A @ 30 VDC. Each digital channel has its own status LED. Isolation between channels and backplane bus.APAX-5060 24-ch Relay Output Module.
Relay type: Form A (SPST).
Contact Rating: 5 A @ 250 VAC, 5 A @ 30 VDC.
Each digital channel has its own status LED.
Isolation between channels and backplane bus.
Add to cart
APAX-5046-AE, 24-ch Digital Output Module
€111,00 Excl. VAT / €137,64 Incl. VATVoltage Range: 8 ~ 35 VDC. Short circuit protection. Thermal shutdown protection. Each digital channel has its own status LED. Isolation between channels and backplane.Voltage Range: 8 ~ 35 VDC.
Short circuit protection.
Thermal shutdown protection.
Each digital channel has its own status LED.
Isolation between channels and backplane.
Add to cart
APAX-5001-A1E, 1-slot Backplane Module
€47,00 Excl. VAT / €58,28 Incl. VATOne slot for one APAX-5000 modules Combines with APAX-5002 backplane to satisfy installation requirements Supports both DIN-rail and wall mounting Hot swap mechanism for all APAX I/O modules 30G shock resistance and 2Grms vibration resistanceOne slot for one APAX-5000 modules
Combines with APAX-5002 backplane to satisfy installation requirements
Supports both DIN-rail and wall mounting
Hot swap mechanism for all APAX I/O modules
30G shock resistance and 2Grms vibration resistance
Add to cart
APAX-5017-AE, 12-ch Analog Input Module
€364,00 Excl. VAT / €451,36 Incl. VATAPAX-5017-AE, 12-ch Analog Input Module, Range: ±150mV, ±500mV, ±1V, ±5V, ±10V, ±20mA, 0~20mA, 4~20 mA, 2500 VDC over voltage protection, Input characteristic curve according to IEC 61131, type 1, Isolation between channels and backplane.APAX-5017-AE, 12-ch Analog Input Module,
Range: ±150mV, ±500mV, ±1V, ±5V, ±10V, ±20mA, 0~20mA, 4~20 mA,
2500 VDC over voltage protection,
Input characteristic curve according to IEC 61131, type 1,
Isolation between channels and backplane.
Add to cart
APAX-5040-AE, 24-ch Digital Input Module
€98,00 Excl. VAT / €121,52 Incl. VATAPAX-5040-AE, 24-ch Digital Input Module. Supports both sink and source type input. Rated voltage input value: 24 VDC. ±70 VDC over voltage protection. Input characteristic curve according to IEC 61131, type 1. Each digital channel has its own status LED. Isolation between channels and backplane.APAX-5040-AE, 24-ch Digital Input Module.
Supports both sink and source type input.
Rated voltage input value: 24 VDC.
±70 VDC over voltage protection.
Input characteristic curve according to IEC 61131, type 1.
Each digital channel has its own status LED.
Isolation between channels and backplane.
Add to cart
APAX-5018-AE, 12-ch Thermocouple Input Module
€557,00 Excl. VAT / €690,68 Incl. VATIsolation between channels and backplane, Supports wire burn-out detection functionality (4 ~ 20 mA and Thermocouple), Range: ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V, ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA, Supports configurable input channels with different input type and range, High density 12-ch analog input solution for reading thermocouple sensor data.Isolation between channels and backplane,
Supports wire burn-out detection functionality (4 ~ 20 mA and Thermocouple),
Range: ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V, ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA,
Supports configurable input channels with different input type and range,
High density 12-ch analog input solution for reading thermocouple sensor data.
Add to cart
APAX-5045-AE, 24-ch Digital Input/Output Module
€105,00 Excl. VAT / €130,20 Incl. VAT12 DI channels and 12 DO channels. ±70 VDC over voltage protection for DI channels. Short circuit and thermal shutdown protection. Input characteristic curve according to IEC 61131, type 1. Each digital channel has its own status LED. Isolation between channels and backplane.12 DI channels and 12 DO channels.
±70 VDC over voltage protection for DI channels.
Short circuit and thermal shutdown protection.
Input characteristic curve according to IEC 61131, type 1.
Each digital channel has its own status LED.
Isolation between channels and backplane.
Add to cart
APAX-5343-AE, Power Supply for APAX-5570 Series
€313,00 Excl. VAT / €388,12 Incl. VAT-High Power transmission efficiency of over 88% from AC input to DC output. -Offer 72 Watt for APAX CPU, coupler and I/O modules. -DIN-rail or wall mount installation. -Energy Star compliance. -UL 508 certification. -4242 VDC Isolation Protection. -Output over voltage protection. -Over load protection and short circuit protection (auto-recover mode).-High Power transmission efficiency of over 88% from AC input to DC output.
-Offer 72 Watt for APAX CPU, coupler and I/O modules.
-DIN-rail or wall mount installation.
-Energy Star compliance.
-UL 508 certification.
-4242 VDC Isolation Protection.
-Output over voltage protection.
-Over load protection and short circuit protection (auto-recover mode).
Add to cart
APAX-5002-BE, 2-slot Backplane Module
€88,00 Excl. VAT / €109,12 Incl. VAT- Two slots for two APAX-5000 modules - With built-in expansion ports, two APAX-5002 backplanes can be connected to form a remote expansion - Supports both DIN-rail and wall mounting - Hot swap mechanism for all APAX I/O modules - 30G shock resistance and 2Grms vibration resistance– Two slots for two APAX-5000 modules
– With built-in expansion ports, two APAX-5002 backplanes can be connected to form a remote expansion
– Supports both DIN-rail and wall mounting
– Hot swap mechanism for all APAX I/O modules
– 30G shock resistance and 2Grms vibration resistance
Add to cart
APAX-5070-BE, Modbus/TCP Communication Coupler
€291,00 Excl. VAT / €360,84 Incl. VATAPAX-5070-BE, Modbus/TCP Communication Coupler. Support Modbus/TCP protocol which can be connected with Modbus/TCP master. Dynamic configuration allows users to configure multiple inputs functions in one module. Two RJ-45 ports with the same IP address for building daisy chains. Flexible Modbus address mapping either automatically or manually. Able to connect to APAX digital I/O modules (max. 768 points) or analog I/O modules (max.192 points). With 16 sets of onboard alarm which can be enabled by utility without any programming.APAX-5070-BE, Modbus/TCP Communication Coupler.
Support Modbus/TCP protocol which can be connected with Modbus/TCP master.
Dynamic configuration allows users to configure multiple inputs functions in one module.
Two RJ-45 ports with the same IP address for building daisy chains.
Flexible Modbus address mapping either automatically or manually.
Able to connect to APAX digital I/O modules (max. 768 points) or analog I/O modules (max.192 points).
With 16 sets of onboard alarm which can be enabled by utility without any programming.
Add to cart
APAX-5580-433AE, PC-based Controller Core i3
€1.501,00 Excl. VAT / €1.861,24 Incl. VATAdvantech's APAX-5580 is a powerful DIN-Rail IPC with an Intel Core i7/i3/Celeron CPU. It is the ideal open control platform to be combined with APAX I/O modules, and features flexible I/O expansion, real-time I/O control, network capability through various interfaces, and support dual power input and UPS module for robust power system. It also has a built-in the standard mini PCI express interface for wireless communication and Advantech's iDoor technology. The APAX-5580 is the best solution for data gateway, concentrator and data server applications, its seamless integration with I/O can save your costs and fulfill a diverse range of automation projects.Advantech’s APAX-5580 is a powerful DIN-Rail IPC with an Intel Core i7/i3/Celeron CPU. It is the ideal open control platform to be combined with APAX I/O modules, and features flexible I/O expansion, real-time I/O control, network capability through various interfaces, and support dual power input and UPS module for robust power system. It also has a built-in the standard mini PCI express interface for wireless communication and Advantech’s iDoor technology. The APAX-5580 is the best solution for data gateway, concentrator and data server applications, its seamless integration with I/O can save your costs and fulfill a diverse range of automation projects.
Add to cart
APAX-5046SO-A1E, 20-Ch Source Type DO Module
€138,00 Excl. VAT / €171,12 Incl. VATThermal Shutdown Protection. Short Circuit Protection. 2,500 VDC Isolation Between Channels and Backplane.Thermal Shutdown Protection.
Short Circuit Protection.
2,500 VDC Isolation Between Channels and Backplane.
Add to cart
APAX-5013-AE, 8-ch RTD Module
€367,00 Excl. VAT / €455,08 Incl. VATAPAX-5013 8-ch RTD Module, Wire Burn-out Detection, High Density Channel design, total 8 channels. APAX-5013 modules offer analog input channels for voltage and current signal measurement. Users can configure each channel with different input type and measurement range.Add to cartAPAX-5013 8-ch RTD Module, Wire Burn-out Detection, High Density Channel design, total 8 channels.
APAX-5013 modules offer analog input channels for voltage and current signal measurement. Users can configure each channel with different input type and measurement range.
Reviews
There are no reviews yet.