APAX-5070, Modbus/TCP Communication Coupler
€309,00 Excl. VAT / €383,16 Incl. VAT
APAX-5070-BE, Modbus/TCP Communication Coupler.
Support Modbus/TCP protocol which can be connected with Modbus/TCP master.
Dynamic configuration allows users to configure multiple inputs functions in one module.
Two RJ-45 ports with the same IP address for building daisy chains.
Flexible Modbus address mapping either automatically or manually.
Able to connect to APAX digital I/O modules (max. 768 points) or analog I/O modules (max.192 points).
With 16 sets of onboard alarm which can be enabled by utility without any programming.
DatasheetAvailable on backorder
The APAX-5070-BE Modbus/TCP Communication Coupler is a high-density Modbus/TPC remote I/O solution. It allows any PC, controller, or HMI device that supports Modbus/TCP protocol to easily and cost-effectively add remote I/O functionality to access data. It also performs read and write actions. By leveraging the Advantech APAX product line features such as, high density I/O, flexibility, scalability, and hot swap functionality. Users can build remote I/O systems to fulfill PLC or control application needs.
| Weight | 0,19 kg |
|---|---|
| Dimensions | 236 × 160 × 55 cm |
| Datasheet | https://advanbuy.com/Products/APAX/APAX-5070_DS20140422112632.pdf |
Only logged in customers who have purchased this product may leave a review.
Related products
-
APAX-5045-AE, 24-ch Digital Input/Output Module
€105,00 Excl. VAT / €130,20 Incl. VATAdd to cart12 DI channels and 12 DO channels.
±70 VDC over voltage protection for DI channels.
Short circuit and thermal shutdown protection.
Input characteristic curve according to IEC 61131, type 1.
Each digital channel has its own status LED.
Isolation between channels and backplane. -
APAX-5040-AE, 24-ch Digital Input Module
€107,00 Excl. VAT / €132,68 Incl. VATAdd to cartAPAX-5040-AE, 24-ch Digital Input Module.
Supports both sink and source type input.
Rated voltage input value: 24 VDC.
±70 VDC over voltage protection.
Input characteristic curve according to IEC 61131, type 1.
Each digital channel has its own status LED.
Isolation between channels and backplane. -
APAX-5017-AE, 12-ch Analog Input Module
€364,00 Excl. VAT / €451,36 Incl. VATAdd to cartAPAX-5017-AE, 12-ch Analog Input Module,
Range: ±150mV, ±500mV, ±1V, ±5V, ±10V, ±20mA, 0~20mA, 4~20 mA,
2500 VDC over voltage protection,
Input characteristic curve according to IEC 61131, type 1,
Isolation between channels and backplane. -
APAX-5013, 8-ch RTD Module
€389,00 Excl. VAT / €482,36 Incl. VATAdd to cartAPAX-5013 8-ch RTD Module, Wire Burn-out Detection, High Density Channel design, total 8 channels.
APAX-5013 modules offer analog input channels for voltage and current signal measurement. Users can configure each channel with different input type and measurement range.
Reviews
There are no reviews yet.