APAX-5080-AE, 4/8-ch High Speed Counter Module
€236,00 Excl. VAT / €292,64 Incl. VAT
Supports multiple operating modes: (1) Up mode (2) Up/Down mode (3) Pulse/Direction mode (4) A/B Phase mode (5) Frequency mode.
4 or 8 counter channels depends on operating modes.
32-bit counter range with 1 bit overflow/underflow.
1 MHz counter frequency.
4 digital input channels with counter gate functionality.
4 digital output channels with counter alarm output functionality.
Over voltage, short circuit and thermal protection design.
2500 VDC isolation protection (between channels and backplane).
DatasheetAvailable on backorder
APAX-5080-AE, 4/8-ch High Speed Counter Module.
The APAX-5080 Counter Module from Advantech has up to eight channels and is hot-swappable.
The APAX-5080, with its 4/8 counter channels, can take counts from multiple sources at the same time using any of its five operating modes (UP, UP/Down, Frequency, Pulse/Direction, and A/B Phase). As a result, hardware installation costs are reduced, and scalability is increased.
| Weight | 0,175 kg |
|---|---|
| Dimensions | 236 × 160 × 55 cm |
Only logged in customers who have purchased this product may leave a review.
Related products
-
APAX-5070, Modbus/TCP Communication Coupler
€309,00 Excl. VAT / €383,16 Incl. VATAdd to cartAPAX-5070-BE, Modbus/TCP Communication Coupler.
Support Modbus/TCP protocol which can be connected with Modbus/TCP master.
Dynamic configuration allows users to configure multiple inputs functions in one module.
Two RJ-45 ports with the same IP address for building daisy chains.
Flexible Modbus address mapping either automatically or manually.
Able to connect to APAX digital I/O modules (max. 768 points) or analog I/O modules (max.192 points).
With 16 sets of onboard alarm which can be enabled by utility without any programming. -
APAX-5018-AE, 12-ch Thermocouple Input Module
€555,00 Excl. VAT / €688,20 Incl. VATAdd to cartIsolation between channels and backplane,
Supports wire burn-out detection functionality (4 ~ 20 mA and Thermocouple),
Range: ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V, ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA,
Supports configurable input channels with different input type and range,
High density 12-ch analog input solution for reading thermocouple sensor data. -
APAX-5001, 1-slot Backplane Module
€50,00 Excl. VAT / €62,00 Incl. VATAdd to cartOne slot for one APAX-5000 modules
Combines with APAX-5002 backplane to satisfy installation requirements
Supports both DIN-rail and wall mounting
Hot swap mechanism for all APAX I/O modules
30G shock resistance and 2Grms vibration resistance
-
APAX-5040-AE, 24-ch Digital Input Module
€107,00 Excl. VAT / €132,68 Incl. VATAdd to cartAPAX-5040-AE, 24-ch Digital Input Module.
Supports both sink and source type input.
Rated voltage input value: 24 VDC.
±70 VDC over voltage protection.
Input characteristic curve according to IEC 61131, type 1.
Each digital channel has its own status LED.
Isolation between channels and backplane.
Reviews
There are no reviews yet.