ADAM-5013, 3-ch RTD Input Module
€271,04 Excl. VAT / €336,09 Incl. VAT
-Accuracy: ±0.1% or better.
-Effective resolution: 16-bit.
-Input connections: 2, 3 or 4 wire.
-Sampling rate: 10 samples/sec. (total).
-Isolation voltage: 3000 VDC.
-Input type: PT100 or Ni RTD.
-Channels: 3.
Available on backorder
ADAM-5013 3-ch RTD Input Module.
-Accuracy: ±0.1% or better.
-Effective resolution: 16-bit.
-Input connections: 2, 3 or 4 wire.
-Sampling rate: 10 samples/sec. (total).
-Isolation voltage: 3000 VDC.
-Input type: PT100 or Ni RTD.
-Channels: 3.
Weight | 0,10 kg |
---|---|
Dimensions | 150 × 73 × 50 cm |
Manufacturer | Advantech |
Only logged in customers who have purchased this product may leave a review.
Related products
-
ADAM-5050, 16-ch Universal Digital I/O Module
€113,26 Excl. VAT / €140,44 Incl. VATAdd to cart-Digital input: Support Dry/Wet Contact.
-Digital output: Open Collector to 30 V, 450 mW max. load.
-I/O Type: bit-wise selectable by DIP switch.
-Power consumption: 0.35 W (typical); 1.2 W (max).
-Channels: 16. -
ADAM-5052, 8-ch Isolated Digital Input Module w/LED
€93,06 Excl. VAT / €115,39 Incl. VATAdd to cart– Digital input level: Logic level 0: +1 V max.
-Isolation voltage: 5000 VRMS.
-Power consumption: 0.27 W (max).
-Channels: 8. -
ADAM-5024, 4-ch Analog Output Module
€327,70 Excl. VAT / €406,35 Incl. VATAdd to cart-Accuracy: ±0.1% of FSR for current output.
-Effective resolution: 12-bit.
-Isolation voltage: 3000 VDC.
-Output range: 0 ~ 20 mA, 4 ~ 20 mA, 0 ~10 V.
-Resolution: ±0.015% of FSR.
-Channels: 4.
-Output type: mA, V. -
ADAM-5081, 4-ch High Speed Counter/Frequency Module
€446,08 Excl. VAT / €553,14 Incl. VATAdd to cart-Minimum Pulse Width: 1μ sec. (Frequency/Counter Mode).
-Function Mode: Counter (Up/Down, Bi-direction, Up, A/B Phase) Frequency.
-Input Frequency: Frequency Mode: 5Hz ~1MHz Counter Mode: 1MHz max.
-Isolated Voltage: 2500 Vdc.
-Programmable Digital Noise Filter: 1~65000μ sec.
-4 channels for Counter, 8 channels for Frequency.
-Counter Aux. Function: Initial preset, hi-low alarm setting, alarm digital output mapping, overflag.
Reviews
There are no reviews yet.