APAX-5060-A1E, 24-ch Relay Output Module
€145,00 Excl. VAT / €179,80 Incl. VAT
APAX-5060 24-ch Relay Output Module.
Relay type: Form A (SPST).
Contact Rating: 5 A @ 250 VAC, 5 A @ 30 VDC.
Each digital channel has its own status LED.
Isolation between channels and backplane bus.
DatasheetAvailable on backorder
APAX-5060 24-ch Relay Output Module.
Relay type: Form A (SPST).
Contact Rating: 5 A @ 250 VAC, 5 A @ 30 VDC.
Each digital channel has its own status LED.
Isolation between channels and backplane bus.
| Weight | 0,2 kg |
|---|---|
| Dimensions | 3 × 13,9 × 10 cm |
Only logged in customers who have purchased this product may leave a review.
Related products
-
APAX-5018-AE, 12-ch Thermocouple Input Module
€555,00 Excl. VAT / €688,20 Incl. VATAdd to cartIsolation between channels and backplane,
Supports wire burn-out detection functionality (4 ~ 20 mA and Thermocouple),
Range: ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V, ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA,
Supports configurable input channels with different input type and range,
High density 12-ch analog input solution for reading thermocouple sensor data. -
APAX-5080-AE, 4/8-ch High Speed Counter Module
€236,00 Excl. VAT / €292,64 Incl. VATAdd to cartSupports multiple operating modes: (1) Up mode (2) Up/Down mode (3) Pulse/Direction mode (4) A/B Phase mode (5) Frequency mode.
4 or 8 counter channels depends on operating modes.
32-bit counter range with 1 bit overflow/underflow.
1 MHz counter frequency.
4 digital input channels with counter gate functionality.
4 digital output channels with counter alarm output functionality.
Over voltage, short circuit and thermal protection design.
2500 VDC isolation protection (between channels and backplane). -
APAX-5001, 1-slot Backplane Module
€50,00 Excl. VAT / €62,00 Incl. VATAdd to cartOne slot for one APAX-5000 modules
Combines with APAX-5002 backplane to satisfy installation requirements
Supports both DIN-rail and wall mounting
Hot swap mechanism for all APAX I/O modules
30G shock resistance and 2Grms vibration resistance
-
APAX-5002, 2-slot Backplane Module
€93,00 Excl. VAT / €115,32 Incl. VATAdd to cart– Two slots for two APAX-5000 modules
– With built-in expansion ports, two APAX-5002 backplanes can be connected to form a remote expansion
– Supports both DIN-rail and wall mounting
– Hot swap mechanism for all APAX I/O modules
– 30G shock resistance and 2Grms vibration resistance
Reviews
There are no reviews yet.