DatasheetAPAX-5046-AE, 24-ch Digital Output Module.
Voltage Range: 8 ~ 35 VDC.
Short circuit protection.
Thermal shutdown protection.
Each digital channel has its own status LED.
Isolation between channels and backplane.
APAX-5046 modules offer 24 digital output channels.
Their output channels can generate discrete signal to external devices and change its output value to control the external devices.
| Weight | 0,165 kg |
|---|---|
| Dimensions | 3 × 13,9 × 10 cm |
Only logged in customers who have purchased this product may leave a review.
Related products
-
APAX-5017-AE, 12-ch Analog Input Module
€364,00 Excl. VAT / €451,36 Incl. VATAdd to cartAPAX-5017-AE, 12-ch Analog Input Module,
Range: ±150mV, ±500mV, ±1V, ±5V, ±10V, ±20mA, 0~20mA, 4~20 mA,
2500 VDC over voltage protection,
Input characteristic curve according to IEC 61131, type 1,
Isolation between channels and backplane. -
APAX-5013, 8-ch RTD Module
€389,00 Excl. VAT / €482,36 Incl. VATAdd to cartAPAX-5013 8-ch RTD Module, Wire Burn-out Detection, High Density Channel design, total 8 channels.
APAX-5013 modules offer analog input channels for voltage and current signal measurement. Users can configure each channel with different input type and measurement range.
-
APAX-5070, Modbus/TCP Communication Coupler
€309,00 Excl. VAT / €383,16 Incl. VATAdd to cartAPAX-5070-BE, Modbus/TCP Communication Coupler.
Support Modbus/TCP protocol which can be connected with Modbus/TCP master.
Dynamic configuration allows users to configure multiple inputs functions in one module.
Two RJ-45 ports with the same IP address for building daisy chains.
Flexible Modbus address mapping either automatically or manually.
Able to connect to APAX digital I/O modules (max. 768 points) or analog I/O modules (max.192 points).
With 16 sets of onboard alarm which can be enabled by utility without any programming. -
APAX-5002, 2-slot Backplane Module
€93,00 Excl. VAT / €115,32 Incl. VATAdd to cart– Two slots for two APAX-5000 modules
– With built-in expansion ports, two APAX-5002 backplanes can be connected to form a remote expansion
– Supports both DIN-rail and wall mounting
– Hot swap mechanism for all APAX I/O modules
– 30G shock resistance and 2Grms vibration resistance
Reviews
There are no reviews yet.