Category: Automation Controllers(PAC)
Automation Controllers(PAC)
Showing 33–48 of 50 results
-
APAX-5002-BE, 2-slot Backplane Module
€93,00 Excl. VAT / €115,32 Incl. VATAdd to basket– Two slots for two APAX-5000 modules
– With built-in expansion ports, two APAX-5002 backplanes can be connected to form a remote expansion
– Supports both DIN-rail and wall mounting
– Hot swap mechanism for all APAX I/O modules
– 30G shock resistance and 2Grms vibration resistance
-
APAX-5013-AE, 8-ch RTD Module
€389,00 Excl. VAT / €482,36 Incl. VATAdd to basketAPAX-5013 8-ch RTD Module, Wire Burn-out Detection, High Density Channel design, total 8 channels.
APAX-5013 modules offer analog input channels for voltage and current signal measurement. Users can configure each channel with different input type and measurement range.
-
APAX-5017-AE, 12-ch Analog Input Module
€364,00 Excl. VAT / €451,36 Incl. VATAdd to basketAPAX-5017-AE, 12-ch Analog Input Module,
Range: ±150mV, ±500mV, ±1V, ±5V, ±10V, ±20mA, 0~20mA, 4~20 mA,
2500 VDC over voltage protection,
Input characteristic curve according to IEC 61131, type 1,
Isolation between channels and backplane. -
APAX-5018-AE, 12-ch Thermocouple Input Module
€591,00 Excl. VAT / €732,84 Incl. VATAdd to basketIsolation between channels and backplane,
Supports wire burn-out detection functionality (4 ~ 20 mA and Thermocouple),
Range: ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V, ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA,
Supports configurable input channels with different input type and range,
High density 12-ch analog input solution for reading thermocouple sensor data. -
APAX-5028-AE, 8-ch Analog Output Module
€427,00 Excl. VAT / €529,48 Incl. VATAdd to basketAPAX-5028-AE, 8-ch Analog Output Module.
8-ch voltage and current output,
Range: ±2.5 V, ±5 V, ±10 V, 0~2.5 V, 0~5 V, 0~10 V, 0~20 mA, 4~20 mA,
Resolution: 14-bit,
Short Circuit Protection,
Isolation between channels and backplane.
-
APAX-5040-AE, 24-ch Digital Input Module
€103,00 Excl. VAT / €127,72 Incl. VATAdd to basketAPAX-5040-AE, 24-ch Digital Input Module.
Supports both sink and source type input.
Rated voltage input value: 24 VDC.
±70 VDC over voltage protection.
Input characteristic curve according to IEC 61131, type 1.
Each digital channel has its own status LED.
Isolation between channels and backplane.
-
APAX-5045-AE, 24-ch Digital Input/Output Module
€105,00 Excl. VAT / €130,20 Incl. VATAdd to basket12 DI channels and 12 DO channels.
±70 VDC over voltage protection for DI channels.
Short circuit and thermal shutdown protection.
Input characteristic curve according to IEC 61131, type 1.
Each digital channel has its own status LED.
Isolation between channels and backplane.
-
APAX-5046-AE, 24-ch Digital Output Module
€118,00 Excl. VAT / €146,32 Incl. VATAdd to basketVoltage Range: 8 ~ 35 VDC.
Short circuit protection.
Thermal shutdown protection.
Each digital channel has its own status LED.
Isolation between channels and backplane.
-
APAX-5046SO-A1E, 20-Ch Source Type DO Module
€146,00 Excl. VAT / €181,04 Incl. VATAdd to basketThermal Shutdown Protection.
Short Circuit Protection.
2,500 VDC Isolation Between Channels and Backplane.
-
APAX-5060-A1E, 24-ch Relay Output Module
€146,00 Excl. VAT / €181,04 Incl. VATAdd to basketAPAX-5060 24-ch Relay Output Module.
Relay type: Form A (SPST).
Contact Rating: 5 A @ 250 VAC, 5 A @ 30 VDC.
Each digital channel has its own status LED.
Isolation between channels and backplane bus.
-
APAX-5070, Modbus/TCP Communication Coupler
€309,00 Excl. VAT / €383,16 Incl. VATAdd to basketAPAX-5070-BE, Modbus/TCP Communication Coupler.
Support Modbus/TCP protocol which can be connected with Modbus/TCP master.
Dynamic configuration allows users to configure multiple inputs functions in one module.
Two RJ-45 ports with the same IP address for building daisy chains.
Flexible Modbus address mapping either automatically or manually.
Able to connect to APAX digital I/O modules (max. 768 points) or analog I/O modules (max.192 points).
With 16 sets of onboard alarm which can be enabled by utility without any programming.
-
APAX-5071-AE, PROFINET Communication Coupler
€357,00 Excl. VAT / €442,68 Incl. VATAdd to basket2 x RJ-45 (2-channel switch, share same IP address) Connector.
APAX-5071-AE is a PROFINET Communication Coupler. -
APAX-5080-AE, 4/8-ch High Speed Counter Module
€254,00 Excl. VAT / €314,96 Incl. VATAdd to basketSupports multiple operating modes: (1) Up mode (2) Up/Down mode (3) Pulse/Direction mode (4) A/B Phase mode (5) Frequency mode.
4 or 8 counter channels depends on operating modes.
32-bit counter range with 1 bit overflow/underflow.
1 MHz counter frequency.
4 digital input channels with counter gate functionality.
4 digital output channels with counter alarm output functionality.
Over voltage, short circuit and thermal protection design.
2500 VDC isolation protection (between channels and backplane).
-
APAX-5343-AE, Power Supply for APAX-5570 Series
€332,00 Excl. VAT / €411,68 Incl. VATAdd to basket-High Power transmission efficiency of over 88% from AC input to DC output.
-Offer 72 Watt for APAX CPU, coupler and I/O modules.
-DIN-rail or wall mount installation.
-Energy Star compliance.
-UL 508 certification.
-4242 VDC Isolation Protection.
-Output over voltage protection.
-Over load protection and short circuit protection (auto-recover mode).
-
APAX-5490-IP4AE, 4 Port RS-232/422/485 Isolation Module
€197,00 Excl. VAT / €244,28 Incl. VATAdd to basket-4 COM ports for APAX controller with PCI express interface.
-COM 1, COM 2 : RS-232/422/485.
-COM 3, COM 4 : RS-232/422/485.
-Baud Rate : 50 bps ~ 230.4 kbps.
-15 kV ESD protection.
-2500 VDC EFT protection.
-2500 VDC isolation protection (between COM ports and backplane).
-
APAX-5580-433AE, PC-based Controller Core i3
€1.501,00 Excl. VAT / €1.861,24 Incl. VATAdd to basketAdvantech’s APAX-5580 is a powerful DIN-Rail IPC with an Intel Core i7/i3/Celeron CPU. It is the ideal open control platform to be combined with APAX I/O modules, and features flexible I/O expansion, real-time I/O control, network capability through various interfaces, and support dual power input and UPS module for robust power system. It also has a built-in the standard mini PCI express interface for wireless communication and Advantech’s iDoor technology. The APAX-5580 is the best solution for data gateway, concentrator and data server applications, its seamless integration with I/O can save your costs and fulfill a diverse range of automation projects.