Category: Automation Controllers(PAC)
Automation Controllers(PAC)
Showing 17–32 of 34 results
-
ADAM-5052, 8-ch Isolated Digital Input Module w/LED
€93.06 Excl. VATAdd to cart– Digital input level: Logic level 0: +1 V max.
-Isolation voltage: 5000 VRMS.
-Power consumption: 0.27 W (max).
-Channels: 8. -
ADAM-5055S, 16-ch Isolated Digital I/O Module with LED
€137.56 Excl. VATAdd to cart-I/O Type: 8 DO & 8 DI.
-Optical Isolation: 2500 Vdc.
-Power Consumption: 0.68 W (Typical).
-16-channel. -
ADAM-5056D, 16-ch Digital Output Module w/LED
€105.20 Excl. VATAdd to cart-Operating voltage: 30 Vmax.
-Digital output: Open collector to 30 V, 100 mA max. load.
-Output status hold function.
-Power consumption: 0.5 W (typical); 0.84 W (max.).
-Power dissipation:300 mW for each channel.
-LED indicator: On: Output logic level “1”.
-Channels: 16. -
ADAM-5056S, 16-ch Sink Type Isolated Digital Output Module w/LED
€133.48 Excl. VATAdd to cart-Over Voltage Protection: 70 Vdc.
-Optical Isolation: 2500 Vdc.
-Power Consumption: 0.6 W (typical).
-Power Dissipation: 300 mW.
-16-channel. -
ADAM-5056SO, 16-ch Source Type Isolated Digital Output Module w/LED
€133.00 Excl. VATAdd to cart-Optical Isolation: 2500 Vdc.
-Over Voltage Protection: 70 Vdc.
-Power Consumption: 0.6 W (max.).
-16-channel.
-
ADAM-5069, 8-ch Power Relay Output Module w/LED
€125.42 Excl. VATAdd to cart-High Power Relay Output : 250Vac@5A, 30Vdc@5A.
-8-channel Relay Output.
-8 form A channels.
-8 LED indicators.
-Jumper setting for output status when reset. -
ADAM-5081, 4-ch High Speed Counter/Frequency Module
€446.08 Excl. VATAdd to cart-Minimum Pulse Width: 1μ sec. (Frequency/Counter Mode).
-Function Mode: Counter (Up/Down, Bi-direction, Up, A/B Phase) Frequency.
-Input Frequency: Frequency Mode: 5Hz ~1MHz Counter Mode: 1MHz max.
-Isolated Voltage: 2500 Vdc.
-Programmable Digital Noise Filter: 1~65000μ sec.
-4 channels for Counter, 8 channels for Frequency.
-Counter Aux. Function: Initial preset, hi-low alarm setting, alarm digital output mapping, overflag. -
ADAM-6150, 15-ch Isolated DI/O PROFINET Module
€277.69 Excl. VATAdd to cart-8ch digital input/7ch digital output.
-Protocol : PROFINET.
-2 x RJ-45 LAN for Daisy-chain connectivity.
-2500VDC isolation protection. -
ADAM-6541, 1×10/100Base-TX + 1x100Base-FX Fiber Media converter. Multi-mode SC Type Fiber Optic Port
€160.13 Excl. VATAdd to cartThe ADAM-6541 is an industrial grade converter which is designed to convert Ethernet network (10/100Base-TX) to fiber network (100Base-FX). It …
-
APAX-5001, 1-slot Backplane Module
€44.65 Excl. VATAdd to cartOne slot for one APAX-5000 modules
Combines with APAX-5002 backplane to satisfy installation requirements
Supports both DIN-rail and wall mounting
Hot swap mechanism for all APAX I/O modules
30G shock resistance and 2Grms vibration resistance
-
APAX-5002, 2-slot Backplane Module
€82.42 Excl. VATAdd to cart– Two slots for two APAX-5000 modules
– With built-in expansion ports, two APAX-5002 backplanes can be connected to form a remote expansion
– Supports both DIN-rail and wall mounting
– Hot swap mechanism for all APAX I/O modules
– 30G shock resistance and 2Grms vibration resistance
-
APAX-5028-AE, 8-ch Analog Output Module
€427.31 Excl. VATAdd to cartAPAX-5028-AE, 8-ch Analog Output Module.
8-ch voltage and current output,
Range: ±2.5 V, ±5 V, ±10 V, 0~2.5 V, 0~5 V, 0~10 V, 0~20 mA, 4~20 mA,
Resolution: 14-bit,
Short Circuit Protection,
Isolation between channels and backplane. -
APAX-5040-AE, 24-ch Digital Input Module
€107.15 Excl. VATAdd to cartAPAX-5040-AE, 24-ch Digital Input Module.
Supports both sink and source type input.
Rated voltage input value: 24 VDC.
±70 VDC over voltage protection.
Input characteristic curve according to IEC 61131, type 1.
Each digital channel has its own status LED.
Isolation between channels and backplane. -
APAX-5046-AE, 24-ch Digital Output Module
€117.87 Excl. VATAdd to cartVoltage Range: 8 ~ 35 VDC.
Short circuit protection.
Thermal shutdown protection.
Each digital channel has its own status LED.
Isolation between channels and backplane. -
APAX-5060-A1E, 24-ch Relay Output Module
€144.66 Excl. VATAdd to cartAPAX-5060 24-ch Relay Output Module.
Relay type: Form A (SPST).
Contact Rating: 5 A @ 250 VAC, 5 A @ 30 VDC.
Each digital channel has its own status LED.
Isolation between channels and backplane bus. -
APAX-5070, Modbus/TCP Communication Coupler
€309.79 Excl. VATAdd to cartAPAX-5070-BE, Modbus/TCP Communication Coupler.
Support Modbus/TCP protocol which can be connected with Modbus/TCP master.
Dynamic configuration allows users to configure multiple inputs functions in one module.
Two RJ-45 ports with the same IP address for building daisy chains.
Flexible Modbus address mapping either automatically or manually.
Able to connect to APAX digital I/O modules (max. 768 points) or analog I/O modules (max.192 points).
With 16 sets of onboard alarm which can be enabled by utility without any programming.
Datasheet
