Showing all 11 results

• 

  APAX-5001, 1-slot Backplane Module

  €50,00 Excl. VAT / €62,00 Incl. VAT

  One slot for one APAX-5000 modules

  Combines with APAX-5002 backplane to satisfy installation requirements

  Supports both DIN-rail and wall mounting

  Hot swap mechanism for all APAX I/O modules

  30G shock resistance and 2Grms vibration resistance

   

  Datasheet

  Add to cart
• 

  APAX-5002, 2-slot Backplane Module

  €93,00 Excl. VAT / €115,32 Incl. VAT

  – Two slots for two APAX-5000 modules

  – With built-in expansion ports, two APAX-5002 backplanes can be connected to form a remote expansion

  – Supports both DIN-rail and wall mounting

  – Hot swap mechanism for all APAX I/O modules

  – 30G shock resistance and 2Grms vibration resistance

   

  

  Add to cart
• 

  APAX-5013, 8-ch RTD Module

  €389,00 Excl. VAT / €482,36 Incl. VAT

  APAX-5013 8-ch RTD Module, Wire Burn-out Detection, High Density Channel design, total 8 channels.

  APAX-5013 modules offer analog input channels for voltage and current signal measurement. Users can configure each channel with different input type and measurement range.

  Datasheet

  Add to cart
• 

  APAX-5018-AE, 12-ch Thermocouple Input Module

  €555,00 Excl. VAT / €688,20 Incl. VAT

  Isolation between channels and backplane,
  Supports wire burn-out detection functionality (4 ~ 20 mA and Thermocouple),
  Range: ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V, ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA,
  Supports configurable input channels with different input type and range,
  High density 12-ch analog input solution for reading thermocouple sensor data.

  Datasheet

  Add to cart
• 

  APAX-5028-AE, 8-ch Analog Output Module

  €427,00 Excl. VAT / €529,48 Incl. VAT

  APAX-5028-AE, 8-ch Analog Output Module.

  8-ch voltage and current output,
  Range: ±2.5 V, ±5 V, ±10 V, 0~2.5 V, 0~5 V, 0~10 V, 0~20 mA, 4~20 mA,
  Resolution: 14-bit,
  Short Circuit Protection,
  Isolation between channels and backplane.

  Datasheet

  Add to cart
• 

  APAX-5040-AE, 24-ch Digital Input Module

  €107,00 Excl. VAT / €132,68 Incl. VAT

  APAX-5040-AE, 24-ch Digital Input Module.
  Supports both sink and source type input.
  Rated voltage input value: 24 VDC.
  ±70 VDC over voltage protection.
  Input characteristic curve according to IEC 61131, type 1.
  Each digital channel has its own status LED.
  Isolation between channels and backplane.

  Datasheet

  Add to cart
• 

  APAX-5046-AE, 24-ch Digital Output Module

  €118,00 Excl. VAT / €146,32 Incl. VAT

  Voltage Range: 8 ~ 35 VDC.
  Short circuit protection.
  Thermal shutdown protection.
  Each digital channel has its own status LED.
  Isolation between channels and backplane.

  Datasheet

  Add to cart
• 

  APAX-5060-A1E, 24-ch Relay Output Module

  €145,00 Excl. VAT / €179,80 Incl. VAT

  APAX-5060 24-ch Relay Output Module.
  Relay type: Form A (SPST).
  Contact Rating: 5 A @ 250 VAC, 5 A @ 30 VDC.
  Each digital channel has its own status LED.
  Isolation between channels and backplane bus.

  Datasheet

  Add to cart
• 

  APAX-5070, Modbus/TCP Communication Coupler

  €309,00 Excl. VAT / €383,16 Incl. VAT

  APAX-5070-BE, Modbus/TCP Communication Coupler.
  Support Modbus/TCP protocol which can be connected with Modbus/TCP master.
  Dynamic configuration allows users to configure multiple inputs functions in one module.
  Two RJ-45 ports with the same IP address for building daisy chains.
  Flexible Modbus address mapping either automatically or manually.
  Able to connect to APAX digital I/O modules (max. 768 points) or analog I/O modules (max.192 points).
  With 16 sets of onboard alarm which can be enabled by utility without any programming.

  Datasheet

  Add to cart
• 

  APAX-5080-AE, 4/8-ch High Speed Counter Module

  €236,00 Excl. VAT / €292,64 Incl. VAT

  Supports multiple operating modes: (1) Up mode (2) Up/Down mode (3) Pulse/Direction mode (4) A/B Phase mode (5) Frequency mode.
  4 or 8 counter channels depends on operating modes.
  32-bit counter range with 1 bit overflow/underflow.
  1 MHz counter frequency.
  4 digital input channels with counter gate functionality.
  4 digital output channels with counter alarm output functionality.
  Over voltage, short circuit and thermal protection design.
  2500 VDC isolation protection (between channels and backplane).

  Datasheet

  Add to cart
• 

  APAX-5490-IP4AE, 4 Port RS-232/422/485 Isolation Module

  €197,00 Excl. VAT / €244,28 Incl. VAT

  -4 COM ports for APAX controller with PCI express interface.
  -COM 1, COM 2 : RS-232/422/485.
  -COM 3, COM 4 : RS-232/422/485.
  -Baud Rate : 50 bps ~ 230.4 kbps.
  -15 kV ESD protection.
  -2500 VDC EFT protection.
  -2500 VDC isolation protection (between COM ports and backplane).

  Datasheet

  Add to cart